|
|
 |
|
Septic Tank
Everything that goes down
any of the drains in the house (toilets, showers, sinks, laundry machines) travels first to the septic tank. The septic tank
is a large-volume, watertight tank which provides initial treatment of the household wastewater by intercepting solids and
settleable organic matter before disposal of the wastewater
(effluent) to the drain field.
Function of the Septic Tank
How Long Liquids Must Remain In Tank
Solids Storage
Anaerobic Decomposition
Flow Into And Out Of The Tank
Effluent Filter
Flow Buffering
Microbes in Septic Tanks Digest, Dissolve, and Gasify Complex Organic Wastes.
FUNCTION OF THE SEPTIC TANK
While relatively simple in construction and operation, the septic tank provides a number of important functions through
a complex interaction of physical and biological processes. The essential functions of the septic tank are to: receive all
wastewater from the house separate solids from the wastewater flow cause reduction and decomposition of accumulated solids
provide storage for the separated solids (sludge and scum) pass the clarified wastewater (effluent) out to the drain field
for final treatment and disposal.
Primary Treatment
As stated, the main function of the septic tank is to remove
solids from the
wastewater and provide a clarified effluent for disposal to the drain field.
The septic tank provides
a relatively quiescent body of water where the
wastewater is retained long enough to let the solids separate by both
settling
and flotation. This process is often called primary treatment and
results in three products: scum, sludge, and effluent.
Scum:
Substances lighter than water (oil, grease, fats) float to the top,
where they form a scum layer. This scum layer floats
on top of the water
surface in the tank. Aerobic bacteria work at digesting floating solids.
Sludge: The "sinkable"
solids (soil, grit, bones, unconsumed food particles)
settle to the bottom of the tank and form a sludge layer. The sludge
is
denser than water and fluid in nature, so it forms a flat layer along the
tank bottom. Underwater anaerobic bacteria
consume organic materials in the
sludge, giving off gases in the process and then, as they die off, become
part of the
sludge.
Effluent: Effluent is the clarified wastewater left over after the scum has
floated to the top and the sludge
has settled to the bottom. It is the
clarified liquid between scum and sludge. It flows through the septic tank
outlet
into the drain field.
Back to listings
HOW LONG LIQUIDS MUST REMAIN IN TANK
Effective volume: The floating scum layer on top and the sludge layer on the
bottom take up a certain amount of the
total volume in the tank. The
effective volume is the liquid volume in the clear space between the scum
and sludge layers.
This is where the active solids separation occurs as the
wastewater sits in the tank.
Retention time: In order for
adequate separation of solids to occur, the
wastewater needs to sit long enough in the quiescent conditions of the tank.
The
time the water spends in the tank, on its way from inlet to outlet, is
known as the retention time. The retention time
is a function of the
effective volume and the daily household wastewater flow rate:
Retention Time (days) = Effective
Volume (gallons)/Flow Rate (gallons per day)
A common design rule is for a tank to provide a minimum retention time of
at
least 24 hours, during which one-half to two-thirds of the tank volume is
taken up by sludge and scum storage. Note that
this is a minimum retention
time, under conditions with a lot of accumulated solids in the tank. Under
ordinary conditions
(i.e., with routine maintenance pumping) a tank should
be able to provide two to three days of retention time.
As sludge
and scum accumulate and take up more volume in the tank, the
effective volume is gradually reduced, which results in a
reduced retention
time. If this process continues unchecked-if the accumulated solids are not
cleaned out (pumped) often
enough-wastewater will not spend enough time in
the tank for adequate separation of solids, and solids may flow out of
the
tank with the effluent into the drain field. This can result in clogged pipes
and gravel in the drain field, one
of the most common causes of septic system
failure.
Back to listings
SOLIDS STORAGE
In order to avoid frequent removal of accumulated solids, the septic tank is
(hopefully) designed with ample volume
so that sludge and scum can be stored
in the tank for an extended period of time. A general design rule is that
one-half
to two-thirds of the tank volume is reserved for sludge and scum
accumulation. A properly designed and used septic system
should have the
capacity to store solids for about five years or more. However, the rate of
solids accumulation varies
greatly from one household to another, and actual
storage time can only be determined by routine septic tank inspections.
Back to listings
ANAEROBIC DECOMPOSITION
While fresh solids are continually added to the scum and sludge layers,
anaerobic bacteria (bacteria that live without
oxygen) consume the organic
material in the solids. The by-products of this decomposition are soluble
compounds, which
are carried away in the liquid effluent, and various gases,
which are vented out of the tank via the inlet pipe that ties
into the house
plumbing air vent system.
Anaerobic decomposition results in a slow reduction of the volume of
accumulated
solids in the septic tank. This occurs primarily in the sludge
layer but also, to a lesser degree, in the scum layer. The
volume of the
sludge layer is also reduced by compaction of the older, underlying
sludge. While a certain amount of
volume reduction occurs over time, sludge
and scum layers gradually build up in the tank and eventually must be pumped
out.
Back to listings
FLOW INTO AND OUT OF THE TANK
The inlet and outlet ports of the tank are generally equipped with devices
such as baffles, concrete tees, or in more
recent years, sanitary tees
(T-shaped pipes with one short and one long leg).
Inlets
The inlet device dissipates
the energy of the incoming flow and deflects it
downwards. The vertical leg of the tee extends below the liquid surface
well
into the clear space below the scum layer. This prevents disturbance of the
floating scum layer and reduces disruptive
turbulence caused by incoming
flows. The inlet device also is supposed to prevent short-circuiting of
flows across the
water surface directly to the outlet.
The upper leg of the inlet should extend well above the liquid surface in
order
to prevent floating scum from backing up into, and possibly plugging,
the main inlet pipe. The open top of the inlet tee
allows venting of gases
out of the tank through the inlet pipe and fresh air vents of the household
plumbing.
Outlets
The
outlet device is designed to retain the scum layer within the tank. A
sanitary tee can be used with the lower leg extending
below the scum layer.
The elevation of the outlet port should be 2 to 3 inches below the elevation
of the inlet port.
This prevents backwater and stranding of solids in the
main inlet pipe during momentary rises in the tank liquid level
caused by
surges of incoming wastewater.
Typical inlet/outlet tees
Gas Deflection Baffle
Gases are
produced by the natural digestion of sludge at the bottom of the
tank, and particles of sludge can be carried upward by
these rising gases.
Some tanks have a gas deflection baffle, which prevents gas bubbles (to
which solid particles often
adhere) from leaving the tank by deflecting them
away from the outlet and preventing them from entering the drain field.
Back to listings
THE EFFLUENT FILTER
In newer systems, there is often an effluent filter: one of the significant
improvements in septic tank design in decades.
They range from 4 to 18
inches in diameter. As we have described, the most serious problem with
septic systems is the
migration of solids, grease, or oil into the
drain field, and the filter is effective in preventing this.
A filter restricts
and limits passage of suspended solids into the effluent.
Solids in a filtered system's effluent discharge are significantly
less than
those produced in a non-screened system.
Back to listings
FLOW BUFFERING
The septic tank also provides a buffering of flows between the house and the
drain field. Large surges from the household,
such as toilet flushing or
washing machine drainage, are dampened by the septic tank so that the flows
leaving the tank
and entering the drain field are at substantially lower flow
rates and extend over a longer period of time than the incoming
surges.
Back to listings
MICROBES IN SEPTIC TANKS DIGEST, DISSOLVE, AND GASIFY COMPLEX ORGANIC WASTES
In 1907, W. P. Dunbar conducted tests on the decomposition of vegetable and
animal matter in septic tanks. He stated,
"The author has investigated the
subject by suspending in septic tanks a large number of solid organic
substances, such
as cooked vegetables, cabbages, turnips, potatoes, peas,
beans, bread, various forms of cellulose, flesh in the form of
dead bodies
of animals, skinned and unskinned, various kinds of fat, bones, cartilage,
etc., and has shown that many
of these substances are almost completely
dissolved in from three to four weeks. They first presented a swollen
appearance,
and increased in weight. The turnips had holes on the surface,
which gradually became deeper. The edges of the cabbage
leaves looked as
though they had been bitten, and similar signs of decomposition were visible
in the case of other substances.
Of the skinned animals, the skeleton alone
remained after a short time; with the unskinned animals the process lasted
rather
longer. At this stage I will only point out that the experiments were
so arranged that no portion of the substances could
be washed away; their
disappearance was therefore due to solution and gasification."
|
|
| |
|
